Bring your own thing API Sample MQTT application – How to add new sensor to the cayenne IoT Platform

Cayenne IoT Platform – Bring your own Thing API Example

This post is all about how to use the cayenne Bring your own thing
This sample application will read temperature and humidity from a DHT11 or DHT22 sensor and send the values to Cayenne using MQTT. The python MQTT client and Adafruit DHT sensor library will need to be installed for this script to run.

Install the MQTT client using “sudo pip install paho-mqtt”.

Install the Adafruit library using the commands below:

sudo apt-get install build-essential python-dev python-openssl
git clone
cd Adafruit_Python_DHT
sudo python install

What’s Connected

Raspberry Pi

Dashboard Screenshots

import paho.mqtt.client as mqtt
import time
import sys
import Adafruit_DHT

time.sleep(30) #Sleep to allow wireless to connect before starting MQTT

mqttc = mqtt.Client(client_id="")
mqttc.username_pw_set("username", password="")
mqttc.connect("", port=1883, keepalive=60)

topic_dht11_temp = "v1/username/things/clientid/data/1"
topic_dht11_humidity = "v1/username/things/clientid/data/2"
topic_dht22_temp = "v1/username/things/clientid/data/3"
topic_dht22_humidity = "v1/username/things/clientid/data/4"

while True:
        humidity11, temp11 = Adafruit_DHT.read_retry(11, 17) #11 is the sensor type, 17 is the GPIO pin number (physical pin 11)
        humidity22, temp22 = Adafruit_DHT.read_retry(22, 18) #22 is the sensor type, 18 is the GPIO pin number (physical pin 12)
        if temp11 is not None:
            temp11 = "temp,c=" + str(temp11)
            mqttc.publish(topic_dht11_temp, payload=temp11, retain=True)
        if humidity11 is not None:
            humidity11 = "rel_hum,p=" + str(humidity11)
            mqttc.publish(topic_dht11_humidity, payload=humidity11, retain=True)
        if temp22 is not None:
            temp22 = "temp,c=" + str(temp22)
            mqttc.publish(topic_dht22_temp, payload=temp22, retain=True)
        if humidity22 is not None:
            humidity22 = "rel_hum,p=" + str(humidity22)
            mqttc.publish(topic_dht22_humidity, payload=humidity22, retain=True)
    except (EOFError, SystemExit, KeyboardInterrupt):

Save this file to /home/pi/python/ and fill in your username, password, and client id.

You can also delete the DHT11 or DHT22 lines based on which sensor you are using or add additional lines to check more than 1 sensor.

The topic_dht lines will all need unique channels, so be sure the last digit in the string is unique “v1/username/things/clientid/data/ 1

For testing just run the file with “python /home/pi/python/”.

After it is working correctly add the widget to the dashboard permanently by clicking the + in the upper right hand, then add the python file to your crontab with “sudo crontab -e” then type in “@reboot python /home/pi/python/ &” and save. Reboot and you should see the values on your MQTT dashboard.


Cayenne IoT Platform – complete steps to Connect the Raspberry Pi with Cayenne IoT Platform

Cayenne cloud and Raspberry Pi Connectivity establishment link attached with this post. Check out the below mentioned link and follow the steps to Launch your first IoT Project within a minutes

Below link will talk about the cayenne IoT platform rules and triggers

A quick start – Cayenne IoT Platform